btparse (a C library to parse BibTeX files) version 0.33 22 December, 1999 Greg Ward (gward@python.net) Copyright (c) 1997-2000 by Gregory P. Ward. All rights reserved. This library is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. (Please note that this licence statement only covers the source files in the top-level distribution directory. Source files in the "progs" and "t" sub-directories are covered by either the GNU Library General Public License (getopt.c, getopt1.c, and getopt.h, which come from the GNU C Library) or the GNU General Public Licence (all other files, which were written by me). The files in the "pccts" subdirectory are part of PCCTS 1.33, and were written (for the most part) by Terence Parr. They are *not* covered by either GNU licence. In all cases, consult each file for the appropriate copyright and licensing information.) INTRODUCTION ------------ btparse is the C component of btOOL, a pair of libraries for parsing and processing BibTeX files. Its primary use is as the back-end to my Text::BibTeX library for Perl (the other half of btOOL), but there's nothing to prevent you from writing C programs using btparse -- or from writing extensions to other high-level languages using btparse as a back-end. There's even copious documentation on using the library in the "doc" directory. btparse is built on top of a lexical analyzer and parser constructed using PCCTS (the Purdue Compiler Construction Tool Set), which provides efficient, reliable parsing with excellent error detection, reporting, and recovery. The library provides entry points to the parser, functions to traverse and query the abstract-syntax tree that it produces, and some functions for processing strings in "the BibTeX way". The only requirement for building the library is an ANSI-compliant C compiler. In particular, you do *not* need PCCTS, because enough of it is included in the distribution to build btparse. (Of course, if you play with the grammar file (bibtex.g), then you will need PCCTS to re-build the library. If you do this, though, you should know what you're doing and already have PCCTS.) AVAILABILITY ------------ You can find the latest version of both components of btOOL (btparse and Text::BibTeX), as well as up-to-date information on btOOL, at: http://starship.python.net/~gward/btOOL/ Here you will find HTML versions of the documentation, a technical report describing the project, links to download the code, and whatever other goodies I can come up with over time. The software is also available in my author directory on any CPAN (Comprehensive Perl Archive Network) site, e.g. ftp://cpan.perl.org/pub/CPAN/authors/Greg_Ward/ or on any CTAN (Comprehensive TeX Archive Network) site, in the biblio/bibtex/utils/btOOL/ directory, e.g. ftp://ftp.ctan.org/tex-archive/biblio/bibtex/utils/btOOL/ BUILDING -------- To build the library (which you will have to do in any case, even if you just want to use it through my Perl module), do the following: 1) run the 'configure' script provided with the package The 'configure' script will attempt to find an ANSI-compliant C compiler, first by looking for 'gcc', and then for 'cc'; if neither were found, or 'cc' was attempted but is not ANSI compliant, you'll have to tell configure the name of an ANSI-compliant C compiler to use. You can do this by setting the 'CC' environment variable before running 'configure'; e.g. for csh-like shells: env CC=acc ./configure and for Bourne-like shells: CC=acc ./configure (assuming 'acc' is the name of an ANSI-compliant C compiler on your system). If you need to supply extra flags to the C compiler to put it in "ANSI mode", use the CFLAGS variable, e.g. (for Bourne-like shells): CC=cc CFLAGS=-ansi ./configure (assuming 'cc' can be made ANSI-compliant by supplying the '-ansi' flag on its command line). 'configure' also tends to be rather conservative in coming up with optimization flags; if, for instance, you wish to compile with '-O2' instead of '-g -O' (the default for gcc), do this: CFLAGS=-O2 ./configure If you plan on installing the library, you might want to set the 'installation prefix' before running 'configure'. See the file INSTALL for more details (and, for that matter, more details on everything that 'configure' does). The default installation prefix is '/usr/local', which should be fine for most Unix systems. Apart from that, 'configure' should work without intervention. 2) Type `make lib'. 3) Type `make test'. If anything goes wrong with the build process, please email me. If any of the tests fail, *please* contact me and let me know. It might be helpful to run the test program manually (switch into the "t" directory and run "simple_test" or "read_test", depending on which one failed), as "make test" discards any error messages. If you're just doing this in order to build Text::BibTeX, you're done -- go back to the Text::BibTeX README for further instructions. If you're building btparse for use in your own C programs, you might want to build a shared library and/or install the library. To build the shared library : 4) Type `make shlib'. This should work on modern, ELF-based systems such as Linux, IRIX 5+, or Solaris 2.x (?). For installing the shared library, you're on your own; this is just too system-dependent. To install the library and man pages: 5) Take a look at Makefile.defs to make sure you like the installation directories; if you don't, either edit Makefile.defs or re-run 'configure' with a custom installation prefix. For example: configure --prefix=/tmp/junk to install to /tmp/junk/lib, /tmp/junk/include, and /tmp/junk/man/man3). Keep in mind that if you edit Makefile.defs, any changes there will be lost the next time you run 'configure'. 6) Type `make install'. `make install' will install the static library file (libbtparse.a), the header file that you need to include in your programs to use btparse (btparse.h), and the man pages from the "doc" directory. Again, installing the shared library is too system-dependent -- you're on your own for that. DOCUMENTATION ------------- In the "doc" directory you will find several man pages covering all aspects of btparse. Even if you're not planning on using the library from C, you might be interested in the bt_language page, which covers the lexical and syntactic grammars that btparse uses to parse BibTeX. The documentation is written using the pod (plain ol' documentation) format, but *roff-ready versions (Unix man pages) are included with the distribution. These are the versions that will be installed by `make install', so (as long as the INSTALL_MAN directory from Makefile.defs is in your manual page search path), you should be able to access the documentation using the "man" command. If you have Perl 5 installed, you can use one of the pod converters supplied with it to read or print the documentation; try pod2text, pod2man, pod2html, or pod2latex. If you'd like the documentation in ready-to-print PostScript form, I have written a technical report describing btOOL, with the btparse and Text::BibTeX documentation included as appendices. The whole report is just over 100 pages, around 30 of which make up the btparse documentation (the Text::BibTeX documentation is a further 45 pages). It can be downloaded from the same location as the btOOL code: http://www.aseonline.net/~gward/btOOL/ I may also make the btparse and Text::BibTeX manuals available as separate PostScript files, but they aren't there as of this writing. Finally, HTML versions of both the technical report and the two documentation sets are (or soon will be) available at the btOOL web site: http://starship.python.net/~gward/btOOL/ If you find the documentation useful and would like to see more, please let me know. EXAMPLE PROGRAMS ---------------- Included in the "progs" directory are three example programs, bibparse, biblex, and dumpnames. bibparse provides an example of a well-behaved, useful program based on btparse; by default, it reads a series of BibTeX files (named on the command line), parses them, and prints their data out in a form that is dead easy to parse in almost any language. (I used this as a preliminary to the full-blown Text::BibTeX Perl module; to parse BibTeX data, I just opened a pipe reading the output of bibparse, and used simple Perl code to parse the data.) bibparse uses GNU getopt, but I've included the necessary files with the distribution so you shouldn't have any problems building it. biblex is an example of what *not* to do; it rudely pokes into the internals of both the library and the PCCTS-generated lexical scanner on which it is based. It prints out the stream of tokens in a BibTeX file according to my lexical grammar. Do *not* use this program as an example! I found it useful in debugging the lexical analyzer and parser, and provide it solely for your amusement. dumpnames is, for variety, well-behaved. It uses the name-splitting algorithm supplied in the library (which emulates BibTeX's behaviour) to chop up lists of names and individual names, and dumps all such names found in any 'editor' or 'author' fields in a BibTeX file. These programs are unsupported, under-commented, and undocumented (apart from the above paragraphs). If you would like this to change, tell me about it -- if nobody except me is interested in them, then unsupported and undocumented they will remain. CREDITS ------- Thanks are due to the following people: * for pointing out and helping to debug problems with the build process: Jason Christian Reiner Schlotte Denis Bergquist * for reporting bugs (and in some cases, fixing them) and suggesting changes in the library: Reiner Schlotte Stéphane Genaud Claus Wilke * for sage wisdom, the voice of experience, and inspiration: Oren Patashnik Gerd Neugebauer Nelson H. F. Beebe BUGS AND LIMITATIONS -------------------- See the "BUGS AND LIMITATIONS" section of the btparse(3) man page (in the "doc/" subdirectory) for details. Executive summary: due to a heavy dependence on global variables in the parser and lexical scanner, btparse is not even remotely thread-safe. Furthermore, you can't have two files open and being parsed at the same time; any attempt to do so is an illegal use of the library and will result in your program crashing. Other bugs should be reported to me: Greg Ward . $Id: README,v 1.13 2000/12/23 03:52:02 greg Exp $